Beacon Adhesives Foam-Tac Glue

Beacon Adhesives Foam-Tac is one of the best all-around glues for foam RC building and repair. It dries clear, stays flexible, and creates a strong, durable bond on a wide range of materials commonly used in RC aircraft.

The updated Foam-Tac formula now includes UV blockers to help prevent yellowing or degradation in direct sunlight, plus an added adhesion promoter for even stronger bonding performance.

Foam-Tac is ideal for permanently bonding many types of foams including Depron, BlueCor, Styrofoam, smooth foam, and rough foam. It also works great on carbon fiber, balsa, plywood, plastics, cardboard, cork, fabric, canvas, and more.

For RC builders, Foam-Tac is a go-to adhesive for building and repairing foam airplanes, including motor mounts, control horns, control rods, servo mounting, and securing wires. It can even be used to glue control surfaces directly to the airframe without hinge tape or other fasteners.

Now also available in mini tubes.

Features

• Clear drying
• Flexible bond
• Won’t foam
• UV-blocking improved formula
• Added adhesion promoter for stronger bonding
• Great for foam RC aircraft building and repair
• Available in 1 oz, 2 oz, and 3 mini tubes

Best For

• Foam plane building
• Foam plane repairs
• Mounting servos
• Securing wires
• Installing control horns and rods
• Bonding control surfaces

Materials It Bonds

• Foam
• Smooth foam
• Rough foam
• Styrofoam
• Depron
• BlueCor
• Carbon fiber
• Balsa wood
• Plywood
• Plastics
• Cardboard
• Cork
• Fabric
• Canvas

Directions
All surfaces must be clean and dry. Spread glue evenly on both sides of the material to be bonded. Allow it to air dry for a few seconds, then press the parts together and immediately pull them apart. Wait a few seconds, press together again, and immediately pull apart. Wait a few seconds more, then firmly press together for a permanent bond.

Cure Time
Maximum bond is achieved within 24 hours or less.