Steam HZ054 3-10mm miniature bearing remover tool set

Steam HZ054 3-10mm miniature bearing remover tool set

It is always difficult to disassemble embedded micro bearings, especially small bearings below 6mm, which cannot be found even on the almighty Taobao. This product fully demonstrates the innovative ability of Steam engineers. This is the first time in the industry that such a small bearing remover has been made. It is used in helicopter models and has a wide range of application scenarios.

Φ3/Φ4/Φ5mm miniature bearing removers are suitable for removing bearings with an inner diameter of Φ3/Φ4/Φ5mm. They are made of high-hardness carbon steel CNC fine grinding. There are four types of removers in this group. There are two types of Φ3mm miniature bearing removers:

A. A type for disassembling bearings with small space at the bottom of two bearings. Because the two bearings are already stuck together, the disassembler cannot be extended.

B. One type corresponds to the disassembly of the embedded bearing when the two bearings are separated, and the disassembly of the normal small bearing.

The Φ6/Φ8/Φ10mm miniature bearing disassembler is suitable for disassembling and installing bearings with an inner diameter of Φ6/Φ8/Φ10mm. When installing the bearing, it only applies pressure to the outer ring of the bearing without touching the inner ring of the bearing, which can effectively avoid damage to the bearing steel ball. Therefore, it is also an auxiliary tool for installing propeller clamp bearings.

The Terminator series of tools is a product designed by the designer for more than 20 years. He no longer wanted to design similar products, so he named this series of tools Terminator. This series of tools is very classic and is highly recommended by the designer.