Egodrift Tengu 3220HS 960Kv 6S 380–420 Helicopter Motor

Egodrift Tengu 3220HS 960Kv Helicopter Motor

Power your compatible 380–420 class RC helicopter with the Egodrift Tengu 3220HS 960Kv brushless motor. Intended for 6S LiPo configurations, this version features a 5 × 22 mm external shaft.

Explore applications across SAB Goblin, MSH / XLPower Protos, Steam AK420, and Oxy platforms, with model-specific selection guidance below.

SAB Goblin Applications

• Goblin 380 and Goblin Buddy 380: Established applications identified in Egodrift product information.
• Goblin 420: Conventional motor-drive versions requiring this motor size and shaft configuration.
• RAW 420 Competition: The 3220 size and 960Kv winding fall within SAB’s recommended 6S motor specifications.
• ilGoblin PRO 420: A motor option within SAB’s recommended 3220-size and 900–1000Kv range.
• Mini Genesis 420: A motor option within SAB’s recommended 3220-size and 900–1000Kv range.

RAW 420 Version Check: This recommendation applies to the belt-driven RAW 420 Competition, not the original direct-drive RAW 420.

Confirm motor mounting, pulley alignment, and shaft engagement for your exact SAB model before installation.

MSH / XLPower Protos Applications

Egodrift identifies the Protos 380 as an application for the 3220HS motor family.

For Protos 380 EVO, STD V2, and 420-stretched configurations, confirm the exact motor mount, shaft engagement, and gearing before installation. A stretched model may require different gearing to achieve the intended rotor speed and loading.

Steam AK420 Applications

The AK420 family is another application to consider when selecting a 3220-size motor for a 6S build. For the AK420, AK420 Pro, and AK420 HDX, verify the requirements of the exact kit version before ordering.

Compare motor-body dimensions, mounting pattern, and the 5 × 22 mm external shaft with your installation. A shared 3220 designation alone does not guarantee direct fitment.

Oxy 4 Max

The Oxy 4 Max is identified in the existing Egodrift product information as another application. Confirm motor fitment and gearing for your particular build.

6S Motor & Gearing Selection

Choose the motor pinion or pulley according to your actual drivetrain ratio and target head speed. The same 960Kv motor can produce different rotor speeds in different helicopters.

Match your ESC and battery current capability to the intended load, and verify governor headroom during setup. Stay within the operating limits of the helicopter and blades.

Specifications

• Manufacturer: Egodrift
• Motor family: Tengu 3220HS
• SKU: EGO-11754
• Motor Kv: 960Kv
• Battery configuration: 6S LiPo
• Application class: Compatible 380–420 class helicopters
• Stator dimensions: 32 mm diameter × 20 mm height
• External shaft diameter: 5 mm
• External shaft length: 22 mm

Shaft Version & Installation

This listing is specifically for the 5 × 22 mm external shaft version. Confirm motor clearance, mounting-hole alignment, mounting-screw length, and pinion or pulley engagement.

Use a pinion or pulley with the correct shaft bore and drivetrain specification for your helicopter.

Henseleit TDSF: The TDSF-specific version requires a specially configured longer shaft. This standard 5 × 22 mm version is not the TDSF shaft configuration.

What’s Included

• One Tengu 3220HS 960Kv motor with a 5 × 22 mm external shaft
• Mounting screws — verify the correct length for your installation
• Three pairs of gold-plated bullet connectors

Motor & Gearing Setup Support

Use Egodrift’s Headspeed Calculator to compare motor Kv, battery cell count, main gear, pinion, and ESC output. Enter 960Kv and your actual gearing. For multi-stage drivetrains, use the complete reduction ratio.

Egodrift recommends calculating at 3.8V per cell and aiming for approximately 80% ESC output as a starting point for governor headroom. Calculated speeds are estimates; actual results depend on battery condition, governor behavior, and flight load.

Calculate Your Head Speed

Frequently Asked Questions

Does this motor suit the SAB RAW 420?
Consider it for the belt-driven RAW 420 Competition. It is not a replacement for the original RAW 420’s direct-drive motor.

Is it an option for the ilGoblin PRO 420 and Mini Genesis?
Its 3220 size and 960Kv winding match SAB’s published motor-size and Kv recommendations. Confirm the physical installation and shaft engagement.

Does every 380–420 class helicopter use the same motor mounting?
No. Match the motor dimensions, mounting pattern, shaft length, and gearing to the exact model.

Which shaft version is included?
A 5 mm diameter shaft with a 22 mm external length. This is not the longer TDSF-specific configuration.